We've moved

Hi folks! I know it's been a while since the last post. We've been going through many changes the past few months. Firstly, THE FOOD LAB IS COMPLETED!!!! It has all (well, almost all) the toys a modernist cook would want. Secondly, the general idea of my work has really changed as well, more exciting things to do! So it was only fitting to start a new website aptly named torontofoodlab.com

So again, for the new site,click  torontofoodlab.com

Here's a photo from the new site. Whiskey in a rotary evaporator.

Making butter with a Centrifuge @ 8,000 rpm

I saw that in Modernist cuisine that they made butter using a centrifuge. So I decided to do the same. It's actually REALLY interesting how this piece of equipment separates the heavy cream. As you can see in the photo below, there are 3 layers. The top layer is butter. Later on, I 'll discuss how much butter fat I think may be in it. The middle layer is apparently the water and whey, I have no idea what the bottom layer is, I can however, describe how they taste. 

I separated the layers by first poking a hole through the top layer of butter, and just pouring out the liquids. The water and whey is not as viscous so it pours out first before the bottom layer does. The bottom layer has the consistency of low fat yogurt that has no gums or thickeners present in it. They are also miles apart in flavour. 

The bottom most layer has an extremely rich texture. Thick and creamy, but in a different way. See, its creamy in the sense that it's thick, but it lacks that fatty oomph in the texture. Flavour-wise, it's very subtle. There's not a lot of milky flavours in it, but the texture is just out of this world. The whey on the other hand is packed with flavoour. It has the consistency of skim milk, but its yellowish and not as opaque in appearance. The sweetness of the cream definitely comes through in the middle layer. I derived quite the amount of pleasure from drinking it. Especially knowing that there's probably not a lot of fat in it!

Here, I went to see how much the fat content is in the butter. I don't have the necessary equipment so I decided to do it just by measuring weights before and after boiling off the water. 

I tared off the weight of the pot and measured quite close to 200g. 

I then went to clarify it at a low heat. Technically, only the water would be boiled off. I'm certain there might be more, but for practicality, I just stuck with simple and basic theory that water evaporates, the rest don't. 

Since the goal wasn't exactly to clarify the butter, I didn't skim off the foam that forms. Doing so would only add another variable to the testing, and not to mention take out weight that would not have reduced from the boiling. 

And here is the final weight of 148.01g grams.That's about a 25% loss in weight, making the butter only 75% butter fat. I forgot to mention that left the butter on paper towels before I placed them on the pot. Even if we take into account the flaws in the method of collection and give a margin of error of 5%, that would still make it 80% butter fat at most. 

I was hoping to get 90% butter fat. Perhaps I need to leave it in the centrifuge longer, and at higher rpm. I have to say, that machine scares me a little. I've heard horror stories of labs exploding from centrifuges malfunctioning. Oh well, ALL IN THE NAME OF PROGRESS! I'll be doing this trial again.

I also have some cultured cream I want to centrifuge to make cultured butter. 

Till next time!

GPI Cooks in Philippines

I was lucky enough to go to Philippines and spend Christmas with family. I thought to make the most of it by cooking a 10 course dinner, using the techniques I learned and ingredients from GPI. I had to bring some ingredients from Canada as variety is quite limited in Philippines. For example, I brought some double smoked bacon and short ribs from Cumbrae's farm. I also made the foie gras in Canada since it takes 3 days to make.

All in all though, it was a VERY challenging dinner, mostly due to the limited number of pots and burners, namely 3 burners. It was a painful bottleneck, but we managed. I had some help from a friend who studied in CCA in San Francisco. Another challenging aspect of cooking this kind of dinner in the Philippines is the ingredients; it's just different. Some of the ingredients are not even available, and its actually the ingredients that you would think are easy to find. For example, the only variety of milk and cream available are the ones that have gone under UHT treatment and as a result, some properties are different especially flavour. The flour is different, starches are different. Again, it's the ingredients that you would think would be the same across the globe. One factor that I would argue impacted the dinner most significantly was the weather. Philippines is brutally humid and warm. Salts left out in the open become clumpy, my freeze dried roasted garlic started to get soft, the foie torchon is quick to melt when taken out of the fridge. Also one thing I noticed was that fridges in Philippines aren't as dry, meaning the internal conditions are also quite humid. Again, although the dinner went well, it was definitely a learning experience.

Here are some photos. I wasn't able to take photos of all the courses. Sometimes I just forgot and well, the focus was really on the food.

Mango ravioli with lemon, basil, and a bit of apricot mixed in. Philippine mangoes are without a doubt, some of the best I've ever had.

Poached pear and Gorgonzola nugget

Tomato espuma, with guanciale, local cherry tomato, mussel and micro basil

Squash soup with creme fraiche, candied pecans, chive oil and truffles. The soup was poured table side. 

Scallop and squid, uni puree, pear puree, sweet ponzu soy. Uni is incredibly cheap there. I bought about half a pound of uni for under $10. I used some gums for both purees just to increase the viscosity as well as improve the mouthfeel. 

Tobacco and vanilla bread pudding, almond polvoron. The bread was soaked in an eggless custard. The custard was made using our lambda carrageenan. I love that stuff!

Here's a look at the kitchen I cooked in. 

The 3 burners, how I wish I had 3 more!

We had an amazing counter top to use for the final plating. I hope I didn't scratch it up though. 

Would I do it again...hell yes!